
Bonnet vs hood is the first car part word that catches many new arrivals: Australian workshops say bonnet, American videos and manuals say hood. The same problem repeats for the boot, the windscreen, the indicators and about a dozen more parts. If you are a mechanic, auto electrician or panel beater, learn these pairs before the interview, so your answers sound sure and nobody has to guess what you mean.
Why car part names matter in a trade interview
A tradesperson can lose a few seconds, and some confidence, when they hear a word they never used. An interviewer may say "pop the bonnet and tell me what you check first". If you know that bonnet means hood, you answer at once. If you do not, you stop to translate, and the question gets harder than it is.
This happens in skills assessments as well. VETASSESS says its technical interview areas for a Motor Mechanic (General) include selecting appropriate tools and equipment, and servicing, diagnosing and repairing braking systems, electrical systems, engines, cooling systems and fuel systems. Every one of those areas needs part names, and the assessor is a qualified tradesperson from the same trade. VETASSESS also says the interview is conducted in English and no interpreter is allowed.
The good news is that you already know every part. You only need the local word for it. Many people learn the American words first, from videos and service manuals. Our wider guide to Australian vs American English for tradespeople covers all trades. This post stays with the vehicle, from the front bumper to the back.
12 car part names: Australian word, American word, meaning
Read the table across, then say each Australian word out loud. Where a part has more than one name in Australia, this table gives the one you will hear most often.
| Australian word | American word | What it is |
|---|---|---|
| bonnet | hood | The lid over the engine at the front |
| boot | trunk | The luggage space at the back of a sedan or hatch |
| windscreen | windshield | The front window |
| indicator | turn signal | The blinking light that shows a turn |
| number plate | license plate | The plate with the registration letters and numbers |
| bumper bar | bumper | The bar across the front or rear of the vehicle |
| guard | fender | The body panel over a wheel |
| tyre | tire | The rubber ring on the wheel |
| handbrake | parking brake | The brake that holds the vehicle when it is parked |
| gearbox | transmission | The unit that changes the gear ratio |
| silencer | muffler | The exhaust part that makes the engine quieter |
| petrol | gas (gasoline) | The fuel for most cars |
Two warnings. First, spelling follows the word: tyre in Australia, tire in America. Second, "gas" in Australia usually means LPG or a welding gas, so say petrol when you mean fuel. If an interviewer uses a word that is not in this table, ask what they mean. That is normal and it shows you listen.
Walk around the vehicle: the order to learn the words
Do not learn the pairs from a list in random order. Walk around the car in your mind and name each part as you pass it. This works because you tell your own work in the same order: front, sides, back, underneath.
At the front
Start with the bumper bar, then the bonnet and the windscreen. Under the bonnet you will name the radiator, the battery, the alternator and the engine. Most of these words are the same in both countries. The bonnet itself and the bonnet release (the lever inside the cabin) are the ones that change.
Along the sides
Here you name the guard, the door, the side mirror, the window and the tyre. A panel beater uses these words all day, because a damaged guard or door panel is the repair. If this is your trade, read our panel beater interview page after this post and practise a repair story that uses these words.
At the back and underneath
At the back are the boot, the number plate, the tail lights and the indicators. Underneath are the gearbox, the silencer and the sump (the oil pan). Mechanics should say these words first when an interviewer asks what they check at a service. Our guide to the motor mechanic skills interview in Australia lists what assessors ask on engines, brakes and electrical systems.
How to learn the words in 5 steps
- Pick the vehicle you know best, and walk around it in your mind from the front to the back.
- Say the Australian word for each part out loud, then the word you used before.
- Write one short sentence for each part: "I check the bonnet latch and the radiator cap at every service".
- Record yourself on your phone and listen for words that sound unclear, like windscreen or silencer.
- Repeat the list the next day without looking at it, and add two parts from your own trade.
Sample answers that use the Australian words
Examples help, because you can change them to your own work. These are examples only. Use your own tasks and your own words.
Question: "What do you check first when a car comes in for a service?" A simple answer could be: "First I open the bonnet and check the oil, the coolant and the belts. Then I look at the tyres and the brakes. I write what I find on the job card before I start."
Question: "Tell me about a repair you did on the body of a vehicle." A simple answer could be: "A customer hit a pole and the front guard and bumper bar were damaged. I removed the panel, repaired the damage and sprayed it to match the colour."
Notice the shape: one task, two or three part names, and what you did. Short sentences are easy to say and easy to follow.
Common mistakes with car part words
- Using only American words. Learn both, and use the Australian one in the room.
- Mixing the two without noticing. Saying "the hood of the boot" confuses the listener. Pick one set for the whole interview.
- Saying gas for petrol. In Australia the word can mean LPG, so the interviewer may think of another fuel.
- Staying silent over one word. Describe the part, then ask: "Do you call this the guard?"
- Memorising a list without saying it. A word you only read often sounds wrong when you speak it.
VETASSESS gives the same advice in its guide for candidates: listen carefully to the questions, ask the assessor to repeat a question you do not understand, and answer clearly and as best you can.
Practise the words out loud
Reading a table is only the first step. The Picture Quiz on InterviewTraining.ai is the place to practise trade words, tools and safety signs, and Skills Practice gives you technical trade questions to answer out loud. InterviewTraining.ai has seven practice sections, and you can use it on a phone or a laptop. If you want to see how a session works, how it works shows the steps.
The interviewer will also speak fast, in an Australian accent. For that, listening practice matters as much as vocabulary, and English test practice on PractiseNow can help you with listening and speaking in general.
If you are still deciding where to practise, our Australia interview page explains what workshop interviews are like. After this post, read spanner vs wrench for the tool names that change in the same way.
Rules and requirements can change. Check the official government website before you act.
Frequently asked questions
Is bonnet or hood the correct word in an Australian interview?
In an Australian workshop people say bonnet, so use it when you speak to the interviewer. If you only know hood, say it, then add "the bonnet" so the interviewer knows you understand both words. Most mechanics will help you, but a clear word shows you are ready for the job.
Will the interviewer mark me down for using American words?
An interviewer is listening for your trade knowledge, not for a perfect accent or vocabulary. VETASSESS tells candidates to ask the assessor to repeat a question they do not understand. Using a word like trunk by mistake is fine if you correct yourself and explain what you mean.
What should I do if I forget a car part name?
Describe the part in simple words and keep going. For example, say "the part at the back that holds the exhaust noise down", then name it if you can. A short description of where it is and what it does proves your experience better than silence.
Do these words change between states in Australia?
Most of the words in this guide are used across Australia, but workshops can have their own habits, and a few words differ by region or by older and younger mechanics. If you hear a different word, write it down and use the same one for the rest of the interview.
How many car part names should I learn before the interview?
Start with the twelve in the table, then add the parts you work on every day, for your own trade. A panel beater needs the body words first, an auto electrician needs the lights and wiring words, and a mechanic needs the engine bay and brake words.
Key takeaways
- Bonnet is the Australian word for hood, and boot for trunk: learn both pairs first.
- Learn the car by walking around it, from the front to the back, and say every word out loud.
- Use one set of words in the interview, and describe any part you cannot name.
- Short example sentences with two or three part names make your answers clear.
- Practise with the Picture Quiz and Skills Practice before the real interview.
Topics
- bonnet vs hood
- boot vs trunk
- car parts names australia
- windscreen vs windshield
- mechanic interview australia
- panel beater interview
- australian english for tradespeople



