Skip to the main content

TRA technical interview questions: six kinds an assessor asks, and how to practise them

Trade interviewsPublished 10 min readBy InterviewTraining.ai Team
A diesel mechanic rehearses an interview answer to a laptop at a workshop bench, with a closed notebook beside him.

TRA technical interview questions are not published as a fixed list, so you cannot memorise them. What you can do is learn the six kinds of question an assessor asks: your daily work, how you do a job step by step, safety, tools, a problem you solved, and how you deal with people. Trades Recognition Australia (TRA) says the technical assessment confirms that you can do the full range of tasks expected of a tradesperson in Australia in your occupation. Practise talking about your real work in simple, ordered English, and you are ready for any of them.

What the TRA technical interview is, and who asks the questions

The technical interview is one part of a longer process. In the Offshore Skills Assessment Program, TRA's guidelines set out four steps: choose a TRA-approved Registered Training Organisation (RTO), evidence assessment, technical assessment and program outcome. You finish each step before the next. You can read the full list on the TRA Offshore Skills Assessment Program page.

The interview sits inside step three. It is done by a TRA-approved RTO, and the assessor is a qualified tradesperson in your occupation who is also a qualified assessor. TRA explains the step on its technical assessment page. So the person asking you about wiring, welding or cooking has done that work themselves.

What you face depends on your pathway. In Pathway 1 (no relevant Australian qualification) the technical interview may come with a practical demonstration, and for a licensed occupation the practical part is compulsory. In Pathway 2 the assessor uses a technical interview plus evidence from your employer or referee. We explain the whole process in our guide to the skills assessment technical interview.

Six kinds of question to expect

The practice prompts are examples of each kind, not a leaked list. Some are close to the sample questions that VETASSESS, one TRA-approved RTO, publishes for its own interviews.

Kind of questionWhat the assessor is checkingA practice prompt
Your daily workThat you really do this trade, and how wide your experience is"What is a typical day's work at your job?"
A task, step by stepThe right order, the right tools and the reasons behind each step"You have been given a task. How would you carry out this work?"
Hazards and safetyThat safety is part of how you work, not an extra"What are the main safety hazards at your work, and how do you stay safe?"
Tools and equipmentThat you choose the right tool and understand how it works"Explain how a tool you use works."
A difficult job or faultHow you think when the work is not simple"What is one of the most difficult tasks you do? Why is it difficult?"
People and informationHow you deal with customers, suppliers and written instructions"How would you resolve a conflict with a customer or a supplier?"

VETASSESS says its interview questions are about the knowledge needed to work in your trade in Australia and how you apply that knowledge. Your job is to show that knowledge in plain words.

Your daily work

This is usually the warm-up, and it sets the scene for everything after it. Do not list tools. Describe a normal week in the order it happens.

A simple answer could be: "I am a light vehicle mechanic in a busy workshop. In the morning I do services and brake jobs. In the afternoon I find faults, mostly electrical and engine problems. Once a week I train an apprentice on the hoist." One short paragraph like this tells the assessor your level and the kind of work you can talk about.

A task, step by step

Pick a job you have done many times and say it in order: prepare, do, check. Add the reason for the main steps, because the assessor may follow up with "why do you do it that way?". If you are a carpenter, the steps might be marking out, fixing, checking level and square. If you are a chef, they might be receiving food, preparing, cooking to temperature and storing safely.

If your English is limited, the order itself carries you. Our guide to English level in a trade interview shows why a clear order matters more than long sentences.

Hazards and safety

Expect at least one safety question, whatever your trade. VETASSESS lists workplace health and safety first in its technical interview areas: manual handling, spotting hazards and how to prevent them, and wearing the correct personal protective equipment (PPE). Put the safety step where it really happens in the job, for example isolating power before you touch a circuit. Our list of workplace safety interview questions gives you more to rehearse.

Tools and equipment

Choose one tool you use every day. Say what it is for, how you set it up, and one thing you must never do with it. Tool names matter here, and Australian words can differ from the ones you learned. A mechanic says spanner, not wrench, and bonnet, not hood.

A difficult job or fault

This question shows how you think. Tell a short story with four parts: the problem, what you checked first, what you found and how you fixed it. End with how you tested the result. An honest "I asked a senior tradesperson because I was not sure" is a good answer.

People and information

Trade work is not only tools. Assessors ask what you do when a customer is unhappy, a supplier sends the wrong part, or the drawing and the site do not match. Our guide to real-life scenario questions shows a simple answer order for exactly these cases.

How the questions change by trade

The same six kinds appear in every trade, but the technical content is different. VETASSESS publishes a list of interview areas by occupation and says that list is not complete. Review every unit of your own qualification to see the knowledge you must have. A few examples from that list show the range.

TradeAreas the assessor may ask about
Motor mechanicChoosing tools and equipment; servicing, diagnosing and repairing brakes, electrical systems, engines, cooling and fuel systems
CarpenterWorking from specifications, setting out wall frames, scaffolding parts, levelling, power tools, roof framing and simple concreting
Cook or chefSafe food handling, cutting waste, cooking meat, poultry and seafood, sauces, soups, pastry and costing menus
Fitter-welderDrawings and marking out, measurements, tool selection, fault diagnosis, bearings and welding methods such as MMAW, GMAW, TIG and FCAW

If you are a welder, our welder interview questions and answers shows how to talk about joints, positions and fume. Mechanics can read what happens in a skills interview for a motor mechanic.

How to prepare, step by step

Preparation is cheaper than a second attempt. TRA says the RTO discusses the assessment requirements with you before the technical assessment, and you must agree you can meet them before paying. For the technical interview, TRA's published fee is $2,000 in Pathway 1 and $900 in Pathway 2. TRA also says that failing to attend without notice may mean withdrawal and loss of the fee. Use this plan.

  1. Read the guide and the fact sheet for your occupation from your RTO.
  2. Look up each unit of your qualification on training.gov.au and mark the ones you do every week.
  3. For each unit, write three lines in your own words: what you do, the steps, and the safety point.
  4. Say each answer out loud. Record yourself on your phone and listen for the order.
  5. Ask a friend or family member to question you about your occupation, as the VETASSESS checklist suggests.
  6. Fill gaps. VETASSESS says you can read, ask experts, take a course, ask someone to show you a task, and practise the practical skill.

Writing your answers also helps your evidence step. If your CV does not yet list your daily tasks clearly, a tool such as Build AI CV can help you put them in order. If you are not sure which Australian qualification matches your trade, RPLDirect explains qualifications and skills recognition.

Practise the questions out loud

Reading answers is not the same as saying them. On InterviewTraining.ai you watch an interviewer ask a question on video, answer out loud and receive a score from 0 to 10, with what you did well, what to add and a stronger answer. The answer timer follows the English level you pick: 90 seconds at Foundation, 75 at Working and 60 at Fluent. The marking does not take marks off for your accent, small grammar mistakes or simple words.

Use Skills Practice for technical questions about your own trade and the Mock Interview for a full run. This is practice only. InterviewTraining.ai is not linked to TRA, any RTO or any government body, and practising does not decide your result.

What to expect on the day

Each RTO sets its own rules, so ask yours. As an example, VETASSESS says its technical interview is held online or face to face, takes about three hours and is conducted in English with no interpreter allowed. TRA itself says you must take the technical assessment in English without assistance, and that an IELTS result is not required.

In the same guide, VETASSESS tells candidates to listen carefully, ask the assessor to repeat a question they do not understand, and answer clearly and as best they can. It also says candidates may not bring notes, phones or paper, and that the assessor cannot give a result at the end of the interview.

Common mistakes

  • Learning a list of answers. The assessor can change the question. Learn your own work instead.
  • Skipping the reason. "I do it this way" is weaker than "I do it this way because...".
  • Leaving safety until the end. Put it inside the step where it belongs.
  • Talking only about your team. Say "I" for the parts you did yourself.
  • Guessing when you do not know. Say what you would check, or ask for the question again.

Rules and requirements can change. Check the official government website before you act.

Frequently asked questions

Does TRA publish its technical interview questions?

No. TRA's program pages describe the steps and what the technical assessment confirms, but they do not list questions. Your RTO explains the requirements, and some RTOs publish practice questions in their own guides.

Is the TRA technical interview in English?

Yes. TRA says you must do the technical assessment in English without assistance. It also says an IELTS test is not required, so the interview checks your trade English, not a test score.

Can I use notes in the interview?

Check with your RTO, because rules differ. VETASSESS says candidates must not bring written notes, manuals, phones or paper into its technical interview, so plan to answer from memory.

What if I do not understand a question?

Ask the assessor to repeat it. VETASSESS tells candidates to do exactly this, and it is much better than guessing an answer to a different question.

Does the interview test only knowledge, or practical skills too?

It depends on the pathway and the occupation. In Pathway 1 the assessor may ask for a practical demonstration, and for a licensed occupation it is compulsory. Ask your RTO what applies to your trade.

Key takeaways

  • There is no official question list: prepare six kinds of question instead.
  • The assessor is a qualified tradesperson, so talk about real work in the right order.
  • Put the reason and the safety step inside each answer.
  • Prepare your own words for each unit of your qualification.
  • Practise out loud, and ask your RTO about its exact rules.

Topics

  • tra technical interview questions
  • osap technical interview
  • skills assessment interview
  • trades recognition australia
  • trade interview practice
  • technical interview

Practise this now: Mock Interview

A full timed interview. Choose 10, 15, 20 or 25 questions and your mix of general and trade questions.

Start practising

Related posts

All articles